Skip to content

Engineering that took weeksis done in an afternoon.

Fabrikode builds engineering software for manufacturers. We have three products, for water tanks, steam boilers and aerodynamics. You enter the dimensions; the calculation, the drawing and the quote are ready.

See the products
Part of an A0 sheet exported by WaterForm: dimensioned isometric view of a bolted panel tank, three panels long, two wide and two high, above the title block
WaterForm, A0 technical sheet
DragAero, streamlines around a body (diagram)
Ø 2 000
ThermoForm, A-⁠A section, 3 500 kg/h steam boiler

A designer who knows the shop floor and a software engineer build every product together.

First we look at which job is slow in the workshop, then we turn that job into software. The software starts on the shop floor, not at a desk.

  1. 1.

    Parametric design

    Enter the capacity, the standard and the site dimensions, and the geometry follows. The weeks at the CAD seat are over.

    Parametric design automation
    WaterForm configurator: width, length and height entered as panel counts beside the bolted panel tank model they produce
    WaterForm, the tank model from panel counts
  2. 2.

    Simulation

    Flow analysis runs on the designer's own computer, with no server to set up. Strength calculations arrive with the clause of the standard behind each item.

    Aerodynamic simulation on the machine you already have
    DragAero, flow past a body (diagram)
  3. 3.

    Documents

    The bill of materials, the drawing, the report and the quote all come from the same model. Nothing is typed twice, so the documents never disagree.

    Bolted panel water tanks, sized in panels
    WaterForm engineering view: the tank's volume, 15.117 m³, above the export buttons for the Excel analysis and the inlet and outlet PDF
    WaterForm, Excel and PDF from the same model

Three products, one method: enter the dimensions, get the result.

Each product has its own site, with the details and a way to try it.

WaterForm configurator: a bolted panel tank model beside the connection types, the DN sizes and the list of connections placed on it
AvailableBrowser and desktop

WaterForm

Bolted panel tank design

Enter the panel counts and place the connections by clicking on the model. Panel, bolt and gasket quantities, the A0 drawing and the quote are ready.

In
Panels, material, connections
Out
Quantities, A0 sheet, DXF, quote
Open WaterForm (opens in a new tab)
Free betamacOS 14, Apple Silicon

DragAero

Aerodynamic analysis software that runs on a Mac

Open an STL file, enter the speed and the angle, run. You see the pressure distribution, the streamlines and the lift and drag figures on your own Mac, within minutes. Free during the beta.

In
STL file, speed, angle of attack
Out
Pressure map, streamlines, lift and drag
Get a beta key (opens in a new tab)
Ø 2 000
Demo availableWeb

ThermoForm

Boiler design to EN 12953-3

Enter the order's capacity and working pressure. ThermoForm sizes the boiler to EN 12953-3, runs the checks clause by clause and prepares the report, the formula-driven Excel and the drawing sheet from the same calculation. For Scotch steam, hot-water, high-temperature water and waste-heat boilers, and pressure vessels.

In
Boiler type, capacity and working pressure
Out
Report, Excel calculation book and DXF drawing sheet
Request a demo (opens in a new tab)

Fabrikode was founded by an industrial designer and a systems architect.

Bora Ozbas
Designed by

Bora Ozbas

Industrial designer, BOZ Design

Designs products and factory systems. He sees what is missing on the shop floor, and every product starts there.

boraozbas.com (opens in a new tab)
Emir Alanyalioglu
Engineered by

Emir Alanyalioglu

Systems architect, alany.co

Leads digital automation: turns manual processes into automated, AI-driven ones and leads the development of every product.

alany.co (opens in a new tab)

Common questions

What does Fabrikode make?
Engineering software for manufacturers. There are three products today: WaterForm for bolted panel water tanks, DragAero for aerodynamic analysis, and ThermoForm for steam and hot-water boilers. Each one takes the dimensions you enter and prepares the calculation and the outputs itself.
Where does your software run?
WaterForm runs in the browser, and you can also open it in its desktop application. DragAero runs on Apple Silicon Macs with macOS 14 or later; Intel Macs are not supported. ThermoForm runs in the browser.
How are prices set?
WaterForm is priced per seat, and we quote after a demo, once we know how many people will use it and what you need. DragAero is free during the beta and opens with a key sent to your e-mail; beta keys stop working when the paid version is released. ThermoForm is priced the same way; you can request a demo on its site.

Write to us about what is slow in your production. We will tell you plainly whether we can solve it.

contact@fabrikode.com

We usually reply within 24 hours, and within 3 working days at the latest.